The ParkingArmor 4.2 is hands down the best and most effective rear car bumper protector on the market. The 2" thick foam core is lightweight and perfect for cushioning parking bumps. Weather resistant rubber-like material is suitable for outdoor street parking as well as parking garages.
Note: For Parked Vehicles Only!
|Overall Width||42 inches|
|Distance Between Straps||24 inches|
|Length of Straps||28 inches|
Purchase the right size ParkingArmor for your vehicle
Follow the Fit Guide for more information
Soft foam rubber pads on the straps provide a cushioned surface and raise the straps off the bumper
The impact cushions on the back are in strategic locations of the ParkingArmor for minor bump absorption
Despite what most people think, not all bumper guards are alike. Parking Armor is made of an industrial coated material, resistant to rain, snow and sleet. Parking Armor is all about quality, made of an all weather rubber-like coated material, Parking Armor stays flexible even in coldest weather.
Parking Armor has a durable weather-resistant exterior, similar to that of a turtle's shell, protecting it from the elements and providing maximum coverage for your bumper. With a micro textured coating, ParkingArmor is resistant to not only the elements, but dirt and debris build up too.
For added security there is a vinyl coated steel cable embedded inside the heavy-duty trunk straps of the ParkingArmor. The straps are then triple stitched for durability. Traditional scissors or knives cannot cut the steel reinforced straps on the Parking Armor, so you can park with ease on crowded city streets.
Parking Armor trunk straps have 2” x 4” soft foam rubber pads on the straps. The pads provide a cushioned surface and raise the straps off the bumper. By raising the straps off the bumper, the soft strap pads add an additional barrier layer between the strap fabric and the vehicle bumper.
Using only the best quality products, ParkingArmor incorporates a full-length reflector, which provides increased vehicle visibility and better durability. The reflector is extra bright and runs the full length of the ParkingArmor, so it provides better illumination and vehicle visibility when parked on dark roads or during emergency stops.
ParkingArmor is composed of an industrial strength hi-impact foam core. The flexibility of the foam enables the ParkingArmor to conform to the shape of the vehicle’s bumper once the trunk is closed.
Designed with a Flex Hinge System, the ParkingArmor is able to bend and flex around the contours of the bumper’s top edge. Once curved around the top edge, the flex hinge system allows the ParkingArmor to sit flush with the body of the bumper.
ParkingArmor comes with an added layer of impact protection, soft foam rubber impact cushions in strategic locations on the back of the product. The impact pads provide an added cushioned surface between the product and the bumper, best able to absorb impact from minor parking bumps. It also provides support to for anti-skid protection
Soft Anti-Skid foam pads behind both of the trunk straps help keep everything in place. This also ensures things are easy on your vehicles paint finish.
Posted by Damien R
I did a lot of research in terms of a item that would protect the bummer of my new car from the disrespectful NY NJ drivers who feel it's ok to bump your car to get in a parking spot. I settle on Parking Armor and have not been disappointed. I've come to my car twice since i bought it and knew that the person parking behind me had to tap be in order to get in the spot, but I finally wasn't worried.
The Velcro attachment straps worked fine with my car, but it also came with a Velcro sticky in case you have a special trunk interior. It also says not to drive with it hanging, but I have a few times because some people park way to close and I needed to protection to leave the spot, and it didn't flap around on anything.
I definitely think this product is worth the cost.
Posted by VK
What a great investment to protect the bumper of my vehicle. I live in DC and the drivers here don't care what kind of car you have; they will purposely ram your bumper just to get into a parallel spot. Even if there's adequate space to get in and out of the parking spot. Well worth the investment and peace of mind knowing the bumper is protected.
Before purchasing a ParkingArmor please consider the following:
Your trunk width must be large enough to accommodate storing the ParkingArmor flat when not in use. Measure the interior width of your trunk space to determine the maximum size ParkingArmor your vehicle can accommodate. (For example, if the interior width of your trunk is 46 inches, do not order the 4.8 Edition, order the slightly smaller 4.2 edition, so it can store flat in your trunk).
The location of the vehicle’s exhaust pipes is very important when selecting the correct size ParkingArmor for your vehicle. Be sure to measure the distance between your rear exhaust pipes to ensure you have enough space between ParkingArmor and your exhaust pipes. ParkingArmor should never come in contact with exhaust pipes. Do not cover or block the vehicle’s exhaust (even after parking the exhaust pipes remain hot and any contact may damage the product or vehicle). (next para) Note: For example, the Porsche Cayenne has exhaust pipes located high in the bumper.
If you plan on parking on the street and your rear license plate is located in your bumper, please contact us (link) for alternative product recommendations. Do not cover or obstruct your rear license plate when parking on the street or you risk receiving a ticket.
IF YOU ARE STILL NOT SURE IF PARKING ARMOR IS RIGHT FOR YOU, PLEASE E-MAIL US AT CUSTOMER SERVICE BEFORE PURCHASING.