ParkingArmor 360⁰ features a unique two-layer construction, with an inner impact-absorbing foam core and a soft and durable water-repelling exoskin that’s easy to wipe clean. The patent pending features enable ParkingArmor 360⁰ to easily fit the contour of almost any bumper and is super simple and fast to adjust, deploy and store. Before driving simply fold and secure the side wings onto the center pad and flip the product inside your vehicle’s trunk. For a custom contoured fit you can quickly adjust the Velcro side straps to increase or decrease the product’s tension.
ParkingArmor 360⁰ is available in 2 sizes: 92” and and 84” (see the fit guide to find the correct size for your vehicle).
|Center Height||9.25" / Thickness: 2"|
|Wing Height||8.5" / Thickness: 0.32"|
|Distance between trunk straps||24"|
|Trunk Strap Length||29"|
|Trunk Strap Width||2"|
Purchase the right size ParkingArmor for your vehicle
Follow the Fit Guide for more information
Soft foam rubber pads on the straps provide a cushioned surface and raise the straps off the bumper
The impact cushions on the back are in strategic locations of the ParkingArmor for minor bump absorption
360⁰ bumper protection to protect the full width of your bumper, not just the middle, including the corners!
Unique water-repelling exoskin which fully encases the inner impact-absorbing foam core and is soft, durable, and easy to wipe clean!
Super reflective safety strip oversized for high visibility at night and during roadside emergencies.
Neoprene anti-slip pads on product backside and under the trunk straps provides anti-slip grip and cushioning.
Flip-in / Flip-out functionality takes seconds to fold; lays flat in trunk and can deploy to protect in a matter of seconds.
Adjustable Velcro side tension straps make it easy to increase or decrease the product’s tension for a customized fit.
Flexible attachment hooks can be bent to fit most wheel wells and feature silicone pads for better grip and paint protection.
Triple stitched trunk straps anchor the product securely inside the trunk to help prevent theft.
Outdoor rated weather resistant material can be used in rain or shine and will not crack, break, or tear.
Before purchasing a ParkingArmor please consider the following:
Your trunk width must be large enough to accommodate storing the ParkingArmor flat when not in use. Measure the interior width of your trunk space to determine the maximum size ParkingArmor your vehicle can accommodate. (For example, if the interior width of your trunk is 46 inches, do not order the 4.8 Edition, order the slightly smaller 4.2 edition, so it can store flat in your trunk).
The location of the vehicle’s exhaust pipes is very important when selecting the correct size ParkingArmor for your vehicle. Be sure to measure the distance between your rear exhaust pipes to ensure you have enough space between ParkingArmor and your exhaust pipes. ParkingArmor should never come in contact with exhaust pipes. Do not cover or block the vehicle’s exhaust (even after parking the exhaust pipes remain hot and any contact may damage the product or vehicle). (next para) Note: For example, the Porsche Cayenne has exhaust pipes located high in the bumper.
If you plan on parking on the street and your rear license plate is located in your bumper, please contact us (link) for alternative product recommendations. Do not cover or obstruct your rear license plate when parking on the street or you risk receiving a ticket.
IF YOU ARE STILL NOT SURE IF PARKING ARMOR IS RIGHT FOR YOU, PLEASE E-MAIL US AT CUSTOMER SERVICE BEFORE PURCHASING.