FLEXY GUARD Corner Bumper Guards are made of the highest quality flexible foam rubber and 3M adhesive. A sleek European design along with a matte black finish enables Flexy Guards to blend in seamlessly while protecting your vehicle against parking related scuffs and scrapes. The convex shape of Flexy Guards creates an interior absorption pocket to form between the product and the bumper to maximize protection.
Bumptek corner bumper guards can be attached to the bumper corners or the rear bumper. Helps cushion and block parking related impacts that would scuff and scratch a bumper surface. Bumptek is crafted from a durable and flexible impact absorbing material to cushion minor parking bumps.
IMPORTANT: PLEASE READ BEFORE PURCHASING!
(1) Designed to stick best on painted bumper surfaces. May not stick to unpainted rubber bumpers, such as those found on the 2013 Honda CRV, 2013 Rav4 etc.
(2) Returns will not be accepted once red adhesive lining is removed.
(3) Ideal installation temperature is 72°F or higher. If surface is cold, use a hair dryer or heat gun to warm before installing.
FlexyGuards are designed for heavy-duty outdoor use; rain, sleet or shine FlexyGuards are designed to be used outdoors 24 hours a day, 365 days a year. For maximum performance FlexyGuards are constructed from a chemical, UV and weather resistant revolutionary flexible foam material that remains flexible even in freezing temperatures.
The matte black finish of FlexyGuards enables them to blend in with any vehicle providing an OEM appearance and maximum protection. While blending nicely with any color vehicle, FlexyGuards aide in protecting your vehicle against damage from minor parking bumps.
Using only the best quality products, 3M acrylic adhesive tape provides better durability and superior adhesion. 3M auto adhesive is used for all weather durability and quality, when properly attached FlexyGuards will stay in place until you want to remove or replace them.
The unique flex core design gives FlexyGuards the flexibility to wrap around the car bumper, conforming to its shape for a snug and custom fit. In addition, to the cored out design providing a better fit, it also provides FlexyGuards with added impact absorption properties.
Before purchasing a ParkingArmor please consider the following:
Your trunk width must be large enough to accommodate storing the ParkingArmor flat when not in use. Measure the interior width of your trunk space to determine the maximum size ParkingArmor your vehicle can accommodate. (For example, if the interior width of your trunk is 46 inches, do not order the 4.8 Edition, order the slightly smaller 4.2 edition, so it can store flat in your trunk).
The location of the vehicle’s exhaust pipes is very important when selecting the correct size ParkingArmor for your vehicle. Be sure to measure the distance between your rear exhaust pipes to ensure you have enough space between ParkingArmor and your exhaust pipes. ParkingArmor should never come in contact with exhaust pipes. Do not cover or block the vehicle’s exhaust (even after parking the exhaust pipes remain hot and any contact may damage the product or vehicle). (next para) Note: For example, the Porsche Cayenne has exhaust pipes located high in the bumper.
If you plan on parking on the street and your rear license plate is located in your bumper, please contact us (link) for alternative product recommendations. Do not cover or obstruct your rear license plate when parking on the street or you risk receiving a ticket.
IF YOU ARE STILL NOT SURE IF PARKING ARMOR IS RIGHT FOR YOU, PLEASE E-MAIL US AT CUSTOMER SERVICE BEFORE PURCHASING.